2000 Hyundai Accent L Hatch Back Cylinder Head Assembly Removal and Installation
download 1. 2. 3. 4. 5. Drain the coolant and disconnect the upper radiator hose. Remove the breather hose (between the air cleaner and the rocker cover). Remove the air-intake hose. Remove the vacuum...
View ArticleENGINE MISFIRE 2003-2004 Mustang, 1999-2004 Navigator 2002-2003 Blackwood...
download Some 1999-2004 Navigator, 2002-2003 Blackwood, 2003-2005 Aviator, 2003-2004 Marauder and 2003-2004 Mustang vehicles built before 12/19/2004 equipped with 4.6L 4V/5.4 4V engine may exhibit a...
View Article2000 Ford F-Super Duty 250-550 Clutch Master Cylinder and Reservoir REMOVAL...
download Removal CAUTION: Remove the entire clutch hydraulic system from the vehicle as an assembly when installing a new clutch master cylinder assembly (7C522). 1. Disconnect the clutch hydraulic...
View Article1996 Mitsubishi Eclipse GS-T TIMING BELT & BALANCE SHAFT BELT Removal
download 1. Disconnect negative battery cable. Remove engine undercover. Place wooden block between jack and oil pan, and raise engine slightly. Remove engine mount assembly near timing belt cover. 2....
View Article1997 Toyota Camry CE Axle Shaft: Removal and Installation
download CAUTION: The hub bearing could be damaged if it is subjected to the vehicle weight, such as when moving the vehicle with the drive shaft removed. Therefore, if it is absolutely necessary to...
View Article2006 Ford F-250 Engine 6.0L Diesel Crankshaft Rear Seal Removal
download All vehicles 1. Remove the transmission. For additional information, refer to Section 307-01 for automatic transmissions or Section 308-03 for manual transmissions. Vehicles with manual...
View Article1997 Toyota Camry LE Sedan 4-Door Cylinder Head Installation
download 1. Install cylinder head. A. Place cylinder head on cylinder block. (a) Place a new cylinder head gasket on the cylinder block. CAUTION: Be careful of the installation direction. (b) Place the...
View Article1994 Ford Explorer SPINDLE & SHAFT ASSEMBLY Removal Installation
download Removal 1. Raise and support vehicle. Remove wheel assembly. Remove caliper from rotor. Remove locking hub. See AUTOMATIC LOCKING HUBS or MANUAL LOCKING HUBS under REMOVAL & INSTALLATION....
View ArticleTIMING & BALANCE SHAFT BELTS REMOVAL & INSTALLATION 1992 Honda Accord LX...
download TIMING & BALANCE SHAFT BELTS Removal 1. Disconnect negative battery cable. Position crankshaft with cylinder No. 1 at TDC of compression stroke. See Fig. 1 , Fig. 2 or Fig. 3 . Disconnect...
View Article2004 Ford F-150 Rear Axle Differential Cover Axle Shaft Oil Seal and Rear...
download 1. With the vehicle in NEUTRAL, position on a hoist. For additional information, refer to Section 100-00. 2. Remove the rear wheel and tire assembly. For additional information, refer to...
View Article